Name: 
 

Scroll Saw



Multiple Choice
Identify the choice that best completes the statement or answers the question.
 

 1. 

You should install the scroll saw blade to cut
a.
on the down stroke of the saw
c.
on the up stroke of the saw
b.
at a minimum speed
d.
on the both up and down stroke of the saw
 

 2. 

Before you start the scroll saw, you should check the hold-down adjustment to make certain
a.
there is a half-inch clearance between it and the stock
c.
the correct size of blade is installed
b.
it is as close as possible to the work
d.
it is against the table
 

 3. 

Stock to be cut on the scroll saw should be
a.
soft
c.
flat on the bottom
b.
hard
d.
round on the bottom
 

 4. 

you should feed stock into the scroll saw
a.
in rhythm with motion of hold-down
c.
as fast as possible
b.
at a rate dependent on pulley speed
d.
at a moderate rate of speed
 

 5. 

Adjustments to the machine should be made when
a.
machine is completely stopped
c.
all moving parts are clear
b.
saw blade is on the up stroke
d.
minimum speed is reached
 

 6. 

Before starting the saw, it is very important that the saw blade installation be checked for
a.
stroke
c.
speed
b.
softness
d.
tension
 

 7. 

Material to be cut on the scroll saw must be held
a.
loosely
c.
by another student
b.
firmly
d.
with a clamp
 

Matching
 
 
a.
close
e.
down
b.
speed
f.
size
c.
blade
g.
moderate
d.
up
h.
stroke
 

 8. 

Adjust the hold down so that it is as __________ as possible to the work
 

 9. 

Feed material into the machine at a __________ rate of speed
 

 10. 

Keep fingers away from the saw __________ and hands away from the path of the saw
 

 11. 

Make sure that the teeth of the saw blade are pointed __________ towards the table
 

 12. 

The scroll saw cuts on the down _______ .
 

 13. 

Make sure that the blade is the correct size __________ for the job
 

 14. 

Make sure the machine is at the correct __________ when cutting
 
 
grp002-1.jpg
a.
Speed adjust
g.
hold down
b.
tension
h.
on/off switch
c.
air hose
i.
angle adjust
d.
motor
j.
table
e.
base
k.
blade clamp
f.
upper gaurd
l.
Arm
 

 15. 

What does number 15 point to
 

 16. 

What does number 16 point to
 

 17. 

What does number 17 point to
 

 18. 

What does number 18 point to
 

 19. 

What does number 19 point to
 

 20. 

What does number 20 point to
 

 21. 

What does number 21 point to
 

 22. 

What does number 22 point to
 

 23. 

What does number 23 point to
 

 24. 

What does number 24 point to
 

 25. 

What does number 25 point to
 



 
Check Your Work     Start Over